How to make a garden path made ​​of natural stone

How to make a garden path made ​​of natural stone In the category garden path Many people are interested in knowledge and learning about many subjects, this knowledge may be vital at some point in your life, attention enough, and dive into more detail more articles and learn more information about How to make a garden path made ​​of natural stone.

How to make a garden path made ​​of natural stone – Is necessary to clearly distinguish between the concept of rock natural stone (granite, sandstone, etc.) and its type (cobblestone, flagstone, pavers, etc.). Breed determines origin of the stone, its mineral composition. Type reflects the characteristic shape of the rubble stones attached to them one way or another. So, cobble – it rounded shape and small rounded fragments of stones. There are a huge number of different species of natural stone, each of which has its own characteristics, advantages and disadvantages.

Track of natural stone always have an original and beautifully fit into any garden design. Of course, the stone loses modular artificial materials in the speed and ease of installation, but believe me, the path of natural materials will fit into any design and will be unique. According to this garden path can walk through the garden to the cellar with vegetables or other outbuildings.

In order to lay out a garden path need to partition it with pegs and ropes. Then you need to dig in the future track soil to a depth of 20 – 25 cm depth of ten centimeters of the need to fill fine gravel. This pillow tamp previously watering from a watering can. This way you can achieve high density cushions, which in turn will prevent subsidence and deformation paths of natural stone.

Once the entire area of ​​the track to make pillows need to start creating the forms and the selection and / or splitting stones.

Decking is a box without a bottom, the width of which is equal to the width of the track. Box installed at the place where the garden path subsequently. Formwork height should not be about 10 cm in the box, which serves us formwork, poured concrete, which contains stone. Then formwork moves down the path of the future.

Before you lay the stones need to select the right material. Natural stone can be basalt, granite, gneiss, sandstone, cobblestone or conventional. The latter option is the most preferred in view of economy. Normal cobblestone occurs naturally in most regions of the country. Stones, the size of which is knocked out of the bulk material can be cracked with a sledgehammer.

After the concrete poured, it begin to lay the stones. This should be done slowly. First concrete laid great stones, and between them lay stones smaller. Stones should protrude above the concrete at 5-7 cm in the slope of the track to do for water outflow. If the track adjacent to the house, the outflow should be away from home. If the track runs in the garden, the slope must be from the middle to the sides of the track. The magnitude of the slope is 10 degrees.

Garden paths of stone

There are several options to address the remaining gaps between the stones after laying. Original way – fill in the voids of land and plant grass. Such a path in the garden will look very nice.

How to make a garden path made ​​of natural stone

More practical to fill the void in a solution of liquid concrete. If this get dirty stones, do not rush to wipe them. After the concrete has set firmly it can be easily rubbed away with an iron brush pile.

Track of natural stone look beautiful in any garden, and if there is an opportunity to collect material for free on the shore of the nearest river, the track is not just beautiful, but also very cheap. That in our time a lot.

Just a few years ago for natural stone paths in the garden area ceded its leadership artificial counterpart. It took not much time to get her back on that there are a number of reasons. What is so attractive natural stone, despite its high cost?

Leave a Reply

Your email address will not be published.